User`s manual

3-22 Smartio C104H/HS User’s Manual
F6: INT vector: This is to set interrupt vector for each port. You can set
this feature to “
Yes” (default) and gain best performance
for the board.
4. To setup one more board, please follow the same instructions 2 to 3 described
above.
5. Press F10 to save the latest configuration and exit the SETUP program.
Loading Driver
Having completed the setup, you can load the driver, “BIN\SER-DRV.EXE”, at
the DOS prompt. The driver will detect the
Smartio C104 Series board
automatically. If the board(s) is(are) detected, a message similar to below will show:
API-232 Version 3.5
Universal 2/4/8 serial ports Communication Driver
Setup driver …
Device driver setup O.K.