User`s manual

Appendix Technical Reference

A Specification

v Bus interface : 32-bit PCI

v Number of ports : 4

v I/O address : Assigned by PCI BIOS

v IRQ : Assigned by PCI BIOS

v Data bits : 5, 6, 7, 8

v Stop bits : 1, 1.5, 2

v Parity : None, even, odd, space, mark

v UART : 4¡ÑTI550C

v Speed (bps) : 50 ~ 921.6K

v Connectors : 4¡ÑDB25 male

v Data signals : RS-232¡ÐTxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

v Surge protection : Max. 2000V (C104HS/PCI)

v Operating temp : 0 ~ 55 ¢J

v Power requirement :

C104H/PCI: 86mA max. (+5V), 210mA max. (+12V), 266mA max. (-12V)

C104HS/PCI: 110mA max. (+5V), 230mA max. (+12V), 320mA max. (-12V)

v Dimensions : 120 mm¡Ñ100 mm

B PCI

The 32-bit Smartio C104 PCI Series board complies with the PCI specifications 2.1.

Hardware configuration for IRQ and I/O addresses is automatically assigned by the PCI

BIOS. Hence, you must first plug the board before installing the software driver.

Unlike ISA slots, different PCI slots in the same PC may have different bus numbers and

device numbers with respect to the PCI specifications. The same PCI board will have

different system configurations if switched to a different PCI slot, which may be called

slot-sensitive or slot-dependent. This may also apply to PCI slots in PC with different

motherboard, which may use different device number sets. For example, some use 17,

18, 19, and 20 for identifying the respective PCI slots but some use 11, 12, 13 and 14.