User`s manual

Manual Organization
This manual is composed of six chapters and one appendix. This manual is written for
installers, system administrators and software programmers.
If you are a first-time installer and system administrator, we recommend you to go
through the whole manual except chapter 4.
If you are a software programmer, you may refer to chapter 4, “Serial Programming
Tools”.
If you need cable wiring information, please see the “Connection Cable and Cable
Wiring” chapter.
If you encounter any problem during the installation, please refer to the
“Troubleshooting” chapter.
Chapter 1 Introduction
Overview and features of the Smartio C104 PCI Series boards, list of items and
overall installation guide.
Chapter 2 Hardware Installation
Hardware installation for the Smartio C104 PCI Series boards and connection cable.
Chapter 3 Software Installation
Software installation, configuration, driver installation, driver update and removal
for various operating systems: Windows NT and Windows 95/98.
Chapter 4 Serial Programming Tools
Short description of the programming tools, PComm, under Windows NT and
Windows 95/98.
Chapter 5 Connection Cable and Cable Wiring
Description of the RS-232 cable wiring for the cable and DB37 connector.
Chapter 6 Troubleshooting
Common problems and possible answers for the Smartio C104 PCI Series boards.
Appendix
Specification, PCI, UART.