User`s manual

Software Installation l l Chapter 3
25
3.2.4 Removing the PCI Board
This section explains how to remove the Smartio C104 PCI Series board.
To remove the Smartio C104 PCI Series board,
1. Open the [Control Panel] and click on the [System] icon. Select the [Device
Manager] tab and [Moxa Smartio/Industio PCI series multiport board].
2. Select the desired Smartio C104 PCI Series board and click on the [Remove] button.
Click [OK] when asked to confirm the removal of the board.
3. Click [Yes] to shutdown Windows 95/98 when the system prompts you to reboot.
4. Turn off the power and physically remove the PCI board from the expansion slot.