User`s manual

Software Installation l l Chapter 3
23
3.2.2 COM Port Mapping
If you already have installed the driver and want to re-configure the COM number for the
ports under Windows 95/98, follow this procedure.
1. Open the [Control Panel], click on the [System] icon, select the [Device Manager]
tab, and then [Moxa Smartio/Industio PCI series multiport board]. Select the
desired C104 PCI Series board entry, click on the [Properties] button and select the
[Ports Configuration] tab.
è
2. Assign the desired COM number for the Smartio C104 PCI Series port mapping.
3. Restart the system to activate the latest configuration.