User`s manual

Software Installation l l Chapter 3

Board and Port Ready Stage

Click [OK] for all the dialog boxes to finish the configuration and exit the “MOXA Ports

Installation” dialog box.

In this last stage, you will complete the driver installation.

Windows 95

After the port installation, you can

immediately use the COM ports of the

Smartio C104 PCI Series board without

restarting Windows 95.

Windows 98

After the port installation, click on the

[Finish] button. Now you can

immediately use the COM ports of the

Smartio C104 PCI Series board without

restarting Windows98.

Once the installation is finished, error conditions of the board, if any, are displayed on the

screen. Otherwise, everything should be fine.

If an error message similar to “C104 PCI Series(BusNo=x, DevNo=x, Starting COM=x)

interrupt number is invalid!” appears, consult the “Troubleshooting” chapter.

Note ! Up to now, the driver installation of the Smartio C104 PCI Series

is complete and successful, including the board and port

configuration. However, if changes of the board and port

configuration are needed, please refer to the next section,

“Configuring the Board and Port”, for more configuration details.