User`s manual

Chapter 3 l l Software Installation
20
Port Configuration Stage
This stage displays the “MOXA C104 PCI Series Installation” dialog box for the port
configuration. Here you can map the MOXA ports to the system COM numbers.
è
In the “C104 PCI Series Installation” dialog box, the COM number field of the newly
installed board is undefined. You have to set up all the ports of the board with the desired
“COM Number”. Specify the COM number of the first port in the “C104 PCI Series
Port 1” field and the subsequent ports are mapped to continuous COM numbers. For
instance, if the first port is mapped to COM3, then the second port is sequentially mapped
to COM4.
Click [OK].