User`s manual

Chapter 3 l l Software Installation
14
3.1.4 Updating the Driver
To update the driver for the Smartio C104 PCI Series board, simply remove the driver, as
described in the next section, and then reinstall it as detailed in the “Installing the Driver
section.
3.1.5 Removing the Driver
To remove the driver for the Smartio C104 PCI Series board,
1. Open the [Control Panel], click on the [Network] icon, and select the [Adapters]
tab.
2. Select “MOXA Smartio/Industio PCI Series Adapter” in the adapter list, then
click on the [Remove] button and the [OK] button to remove the driver.
3. Restart the system to activate the new configuration.