User`s manual

Software Installation l l Chapter 3

5. Select “MOXA Smartio/Industio PCI series multiport board” in the “Select OEM

Option” dialog box, and click [OK] to start the installation.

6. The “MOXA Configuration Panel” dialog box appears.

In the “MOXA Configuration Panel” dialog box, only the boards physically

plugged and detected, whether configured or not, will be displayed. For

configured boards, the COM number field is defined. For newly installed boards,

including boards that switch to different PCI slots or PC main board systems, the

COM number field is undefined.

You have to set up all the ports of the board with the desired “COM number”.

Specify the COM number of the first port in the “Port Number” field and the

subsequent ports are mapped to continuous COM numbers. For instance, if the

first port is mapped to COM3, then the second port is sequentially mapped to

COM4.