User`s manual

Chapter 1 l l Introduction

1.4 Installation Guide

This section gives a brief summary of how to install the Smartio C104 PCI Series under

each supported operating system. The installation is simple and involves the following

stages:

Check the PCI BIOS settings

Install the Smartio C104 PCI Series board See chapter 2

and the connection cable

Install the software from the diskette See respective O.S. Section

Configure the driver for the board and ports in chapter 3

Connect the devices with the cable See chapter 5 for cable wiring

Restart the system See chapter 3 for board init.

Check the driver initialization status status checking for each O.S.

If the system restart successfully, you may

develop your applications or See chapter 4, “Serial

execute the desired applications Programming Tools”