User`s manual

NPort 6000 Series User’s Manual Module Settings
6-13
ATTENTION
SNMP indicates a change in DCD or DSR signals but does not differentiate between the two. A
change in either signal from “–” to “+” is indicated by “link up” and a change in either signal
from “+” to “–” is indicated by “link down.”
SMS Alert
To phone number 1/2/3/4: Use this screen to enter up to four phone numbers that will receive
SMS alerts.
NM-Modem
This section applies to NPort 6000 server’s that have the NM-Modem module installed. From the
left navigation panel, click Network Settings Æ Module to configure Modem Settings. The
various configuration items are described in detail below the figure.