User`s manual

NPort 6000 Series User’s Manual Configuration with the Web Console
5-15
For this example, assume that Modem 1 is connected to serial port 1, Modem 2 is connected to
serial port 2, and PPP source and destination IP addresses of modems 1, 2, 3, and 4 are as follows:
Source IP Destination IP Source IP Destination IP
Modem 1
203.67.6.250 202.6.6.250
Modem 3
202.6.6.250 203.67.6.250
Modem 2
203.67.6.249 201.2.2.249
Modem 4
201.2.2.249 203.67.6.249
In this case, you will need to add two entries to the routing table, as shown in the following figure.