User`s manual

NPort 6000 Series User’s Manual Configuration with the Web Console
5-8
Time zone (default=GMT Greenwich Mean Time): This field shows the currently selected time
zone and allows you to select a different time zone.
Local time: This field shows the time that you last opened or refreshed the browser. To set the
local time for the NPort 6000, click on the Modify… button, then submit your changes in the
screen as shown below.
Time server: The NPort 6000 uses SNTP (RFC-1769) for auto time calibration. You may enter a
time server IP address or domain name in this optional field. Once the NPort 6000 is configured
with the correct time server address, it will request time information from the time server every 10
minutes.
Network Settings
Basic Network Settings
You can access Basic Network Settings by expanding the Network Settings item in the
navigation panel. Basic Network Settings is where you assign the NPort 6000 IP address, netmask,
Gateway, and other IP parameters.
NOTE: You must assign a valid IP address to your NPort 6000 before it will work in your network
environment. Your network system administrator should provide you with a unique IP address and
related settings for your network. First-time users can refer to
Chapter 3: Initial IP Address
Configuration, for more information.