User`s manual

NPort 6000 Series User’s Manual Initial IP Address Configuration
3-7
9. Press A or use the arrow keys to select Save and then press ENTER. Press ENTER again to
confirm the save command.
10. Press R or use the arrow keys to select Restart and then press ENTER.
11. Press S or use the arrow keys to select System and then press ENTER to restart the NPort
6000.
Serial Console
The NPort 6000 supports configuration through the serial console, which is the same as the Telnet
console but accessed through the RS-232 console port rather than through the network. Once you
have entered the serial console, the configuration options and instructions are the same as if you
were using the Telnet console.