User`s manual

NPort 6000 Series User’s Manual Initial IP Address Configuration
3-6
5. Press B or use the arrow keys to select Basic, and then press ENTER.
6. Use the arrow keys to move the cursor to IP address. Use the DELETE, BACKSPACE, or
SPACE keys to erase the current IP address, and then type in the new IP address and press
ENTER. Note that if you are using a dynamic IP configuration (BOOTP, SHCP, etc.), you will
need to go to the IP configuration field and press ENTER to select the appropriate
configuration.
7. Press ESC twice to return to previous page. Press Y to confirm the modification.
8. Press ESC to return to previous page.