User`s manual

NPort 6000 Series User’s Manual Initial IP Address Configuration
3-5
1. From the Windows desktop, select Start Æ Run, and type the following in the Run window:
telnet 192.168.127.254
If your IP address is different from the default setting, use your IP address instead. Click OK.
2. The console terminal type selection is displayed as shown. Enter 1 for ansi/vt100 and press
ENTER to continue.
3. The following page will only appear if the NPort 6000 is password protected. Enter the
console password if you are prompted to do so, and press ENTER.
4. Press N or use the arrow keys to select Network, and then press ENTER.