User`s manual

NPort 6000 Series User’s Manual Getting Started
2-5
DIN-Rail Mounting
DIN-rail attachments can be purchased separately to attach the NPort 6150, 6250, and 6450 to a
DIN-rail. When the snapping the attachments to the DIN-rail, make sure that the stiff metal springs
are at the top.
NPort 6450 NPort 6250 NPort 6150
Rack Mounting
Use four screws to attach the NPort 6610/6650 to a standard rack.
NPort 6610/6650
32
/
/
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
Connecting the Hardware
This section describes how to connect the NPort 6000 to serial devices for the first time.
Wiring Requirements
ATTENTION
Disconnect the power before installing and wiring
Disconnect the power cord before installing and/or wiring your NPort 6000.
Do not exceed the maximum current for the wiring
Determine the maximum possible current for each power wire and common wire. Observe all
electrical codes dictating the maximum current allowable for each wire size.
If the current exceeds the maximum rating, the wiring could overheat, causing serious damage to
your equipment.
Server may get hot, use caution when handling
Use caution when handling the NPort 6000 after it has been plugged in. The internal components
generate heat and the casing may be hot to the touch.