User`s manual

NPort 6000 Series User’s Manual Software Installation/Configuration
10-11
9. The Serial Parameters tab in the following figure show the default settings when the NPort
6000 is powered on. However, the program can redefine the serial parameters to different
values after the program opens the port via Win 32 API.
10. Click the Security tab to configure security settings. Select the Enable Data Encryption
option to enable data to be encrypted when transmitted over the COM ports. After selecting
the encryption option, select the Keep connection option to start encrypting COM port
communications immediately without restarting the COM ports. (If your application will
open/close COM port frequently and the NPort 6000 is only for one host, you can enable this
option to speed up the opening/closing time. However, this will result in your host tying up the
COM port so that other hosts cannot use it.) Select the Apply All Selected Ports option to
enable the security settings to be applied to all COM ports.