User`s manual

NPort 6000 Series User’s Manual System Management Settings
9-20
Overrun: The NPort is unable to hand received data to a hardware buffer because the input rate
exceeds the NPort’s ability to handle the data.
Break: Break interrupt; indicates that the received data input was held low for longer than a
full-word transmission time. A full-word transmission time is defined as the total time to transmit
the start, data, parity, and stop bits.
Serial Port Settings
Go to Serial Port Settings under Serial Status to view a summary of the settings for each serial
port.
Serial Cipher Usage Status
Serial Status->Cipher Usage Status
Monitor cipher usage and connection status of each serial port. It is depend on Cipher Settings.