User`s manual

NPort 6000 Series User’s Manual System Management Settings
9-16
Load Factory Defaults
This function will reset all of NPort 6000’s settings to the factory default values. All previous
settings including the console password will be lost. If you wish to keep the NPort 6000 IP address,
netmask, and other IP settings, make sure Keep IP settings is checked off before loading the
factory defaults.
Change Password
For all changes to the NPort 6000’s password protection settings, you will first need to enter the
old password. Leave this blank if you are setting up password protection for the first time. To set
up a new password or change the existing password, enter your desired password under both New
password and Confirm password. To remove password protection, leave the New password and
Confirm password boxes blank.