User`s manual

NPort 6000 Series User’s Manual System Management Settings
9-12
Maintenance
Console Setting
On this screen, access to different NPort 6000 configuration console options (HTTP, HTTPS,
Telnet, SSH) can be enabled or disabled. The NPort 6000 front panel, known as the LCM (Liquid
Crystal Module), may be configured for read-only or writeable access. In other words, you can use
the front panel to check console settings only (read only access) or to actually make changes to the
settings (writeable access). Note that if the console is password-protected and LCM is configured
for writeable access, you will need to enter the password to submit any console setting changes.
Please refer to Change Password later in this chapter for more information on passwords. Finally,
you may also enable or disable the reset button.