User`s manual

NPort 6000 Series User’s Manual System Management Settings
9-6
Authentication Server
RADIUS server IP: If you are using a RADIUS server for user authentication, enter its IP address
here.
RADIUS key: If you are using a RADIUS server for user authentication, enter its password here.
UDP port (default=1645): If you are using a RADIUS server, enter its UDP port assignment here.
RADIUS accounting: Use this field to enable or disable RADIUS accounting.
TACACS+ server: If you are using a TACACS+ server for user authentication, enter its IP
address or domain name here.
TACACS+ secret: If you are using a TACACS+ server for user authentication, enter its password
here.
TACACS+ accounting: Use this field to enable or disable TACACS+ accounting.