Hardware manual

TC-6110 Hardware Hardware Installation
2-11
LAN Ports
The TC-6110 has two 10/100/1000 Mbps LAN ports with M12 hardware interfaces. When the cable is properly
connected, the LEDs on the front panel will glow to indicate a successful link. The tables below show the front
panel layout and the pinouts for the M12 Ethernet LAN connector.
Pin No. 10/100 Mbps 1000 Mbps
1 – TRD3+
2 – TRD4+
3 – TRD4-
4 ERx- TRD1-
5 ETx+ TRD2+
6 ERx+ TRD1+
7 – TRD3-
8 ETx- TRD2-
These LAN ports use the DHCP for the IP address.
Installing the SSD/HDD into the Storage Tray
TC-6110 computers come with two storage trays that can be installed with SSD or HDD for storage expansion.
Step 1: Remove the storage tray from the computer.
Step 2: Remove the six screws that fasten the PCB to the storage tray. These are circled in red, on the figure
below. Please note, it is not necessary to remove the remaining three screws.