User`s manual

NPort 5600-8-DT User’s Manual TTY Drivers for Linux and UNIX
10-4
Removing Linux Driver Files
A utility is included that will remove all driver files, mapped TTY ports, and unload the driver.
Enter the directory /usr/lib/npreal2/driver, then execute mxuninst to uninstall the driver. This
program will perform the following actions:
1. Unload the driver.
2. Delete all files and directories in /usr/lib/npreal2.
3. Delete directory /usr/lib/npreal2.
4. Modify the system initializing script file.
UNIX Fixed TTY Drivers
A fixed TTY driver is provided that will map UNIX host TTY ports to NPort device ports. Once
the mapping has been set up, UNIX users and applications can connect to a device port as if it
were a local TTY port. This driver has been designed and tested for the majority of UNIX systems.
Please check MOXA’s website
(http://www.moxa.com) for the latest UNIX systems support.
Installing the UNIX Driver
1. Log in to UNIX and create a directory for the MOXA TTY. To create a directory named
/usr/etc, execute the command:
# mkdir –p /usr/etc
2. Copy moxattyd.tar to the directory you created. For the /usr/etc directory, you would execute
the following commands:
# cp moxattyd.tar /usr/etc
# cd /usr/etc
3. Extract the source files from the tar file by executing the command:
# tar xvf moxattyd.tar
The following files will be extracted:
README.TXT
moxattyd.c --- source code
moxattyd.cf --- an empty configuration file
Makefile --- makefile
VERSION.TXT --- fixed tty driver version
FAQ.TXT
4. Compile and link.
For SCO UNIX:
# make sco
For UnixWare 7:
# make svr5
For UnixWare 2.1.x, SVR4.2:
# make svr42