User`s manual

NPort 5600-8-DT User’s Manual Using NPort Administrator
8-22
You can also save COM mapping settings to a text file, which can then be used to duplicate the
COM mapping on another host. Use the Export COM Mapping command in the function context
menu to save the current COM mapping settings. Use the Import COM Mapping command to
load COM mapping settings from a previously saved file.
IP Address Report
The IP Address Report function receives automatic IP reports from appropriately configured
NPort device servers. Use the Settings command in the function context menu to designate the
UDP port number that the NPort will use when sending IP address reports. This must correspond
with the network settings on the NPort device server.