User`s manual

NPort 5600-8-DT User’s Manual Using NPort Administrator
8-21
In the Serial Parameters tab, the COM port’s serial communication parameters are defined.
Saving COM Mapping Settings
After mapping COM ports to NPort device ports, you will need to save the COM mapping settings
to the Real COM driver. Use the Apply Change command in the function context menu to save
the mapping settings; use the Discard Change command to delete the changes. Once COM
mapping has been applied, the Real COM driver will transparently connect the designated COM
port to the device port. NPort Administrator is not needed for Real COM operation. COM
mapping will be effective whether or not NPort Administrator is open.