User`s manual

NPort 5600-8-DT User’s Manual Using NPort Administrator
8-12
Add Target: This selects NPort device servers on the LAN for monitoring. You may need to click
“Rescan” to search the network again for NPort device servers. Once a device server has been
found, select it in order to add it to the Monitor list. You can also select “Input manually” to enter
a specific IP address and model for monitoring.
Remove Target: This removes a device server from the monitor list.
Load Configured COM Port: If COM ports have been mapped to NPort device servers, this
command automatically adds those device servers to the monitor list.
Monitoring Parameters
The Settings command specifies which items of information will be monitored, how often the
information is refreshed, and how notification of events will occur.