User`s manual

NPort 5600-8-DT User’s Manual Using NPort Administrator
8-11
ATTENTION
You can update the firmware of multiple units simultaneously, as long as the units are the same
model. Simply hold down the Ctrl or Shift key when selecting the target device servers.
Import/Export Configuration: These commands are used to save or restore the target device
server’s configuration. All configuration settings can be stored on a file to be restored later, from
anywhere on the network.
Follow the onscreen instructions to save or restore the target unit’s configuration.
ATTENTION
You can import the configuration of multiple units simultaneously, as long as the units are the
same model. Simply hold down the Ctrl or Shift key when selecting the target device servers.
Monitor
You can use NPort Administrator for live monitoring of your NPort over the network. Different
parameters and events may be monitored, and you can receive pop-up warnings for certain events.
Finding Your Device Server
If the list of available servers is empty, find your device server on the network using the Add
Target or Load Configured COM Port commands in the function context menu.