User`s manual

NPort 5600-8-DT User’s Manual Using the Web Console
7-4
Device Server Settings
Please refer to Chapter 4 for details on the following settings:
 Basic Settings
 Network Settings
 Serial Settings
 Accessible IP Settings
 Auto Warning Settings
 Change Password
For details on Operating Settings, please refer to Chapter 5.
Special Functions
There are several special functions that are available in the web console. These functions are not
available on NPort Administrator.
Alarm Audio File
This setting is available in the web console only. Please refer to Chapter 7 for additional
information. The audio file parameter is used to configure the built-in audio alarm. Select a .WAV
file to use as the audio alarm. This file must be a 16-bit uncompressed 48 kHz .WAV audio file no
larger than 511 KB.
Monitor
Select one of the Monitor functions in the navigation panel to monitor traffic on the NPort device
server. Refresh your browser to display updated status.
Line
Monitor each device port’s operation mode and connection status (IPx).