User`s manual

NPort 5600-8-DT User’s Manual Operation Mode Advanced Settings
6-6
ATTENTION
When the device port buffer is full, the data will be packed for network transmission, regardless of
the settings for Delimiter 1, Delimiter 2, and Force transmit.

   
Delimiter process
Real COM Mode
TCP Server Mode
TCP Client Mode
UDP Mode
Reverse Telnet Mode
Pair Connection Mode
RFC2217 Mode
Range: Do nothing, Delimiter + 1, Delimiter + 2, Strip
Delimiter
Default: Do Nothing
Description: This controls how data is packed when delimiter
characters are received. Note that this field has no effect if
delimiters are not enabled (see Delimiters 1 and 2).
”Do nothing” will pack the accumulated data including
delimiters.
”Delimiter + 1” will wait for an additional character before
packing the accumulated data.
”Delimiter + 2” will wait for two additional characters
before packing the accumulated data.
”Strip Delimiter” will pack the accumulated data but will
not include the delimiter characters in the packet.

   
Force transmit
Real COM Mode
TCP Server Mode
TCP Client Mode
UDP Mode
Reverse Telnet Mode
Pair Connection Mode
RFC2217 Mode
Range: 0 to 65535 ms
Default: 0 ms
Description: This controls data packing by the amount of time
that elapses between bits of data. As serial data is received,
it accumulates in the device port’s buffer. If serial data is
not received for the specified amount of time, the data that
is currently in the buffer is packed for network transmission.
A setting of 0 means that data in the buffer will not be
automatically packed when no further data is received from
the device. When using this field, make sure that Inactivity
time is disabled or set to a larger value. Otherwise the
connection may be closed before the data in the buffer can
be transmitted.