User`s manual

NPort 5600-8-DT User’s Manual Operation Mode Advanced Settings
6-2
Overview
The device port operation mode determines how the port interacts with the network. Depending on
your application and device, more than one operating mode may be suitable. When setting the
operation mode, different parameters may be adjusted depending on the operation mode.
For each mode, the default settings should work for most applications. Modify these settings only
if absolutely necessary for your application. The operation mode and related parameters can be
configured through NPort Administrator. The same parameters may also be configured using the
web console, Telnet console, or serial console.
List of Parameters
Real COM Mode TCP Server Mode TCP Client Mode UDP Mode Reverse Telnet Mode Pair Connection Mode RFC2217 Mode
Connection Management Parameters
     
TCP alive check time
  
Inactivity time
  
Max connection
  
Ignore jammed IP
 
Allow driver control
Data Packing Parameters
    
Packing length
    
Delimiter 1 and 2
    
Delimiter process
    
Force transmit
Other Parameters
  
Local TCP port

Command port

Destination IP address
 
Destination IP address 1 through 4

Designated local port 1 through 4

Local listen port

Connection Control

Map <CR-LF>