User`s manual

NPort 5600-8-DT User’s Manual Introduction to Operation Modes
5-5
Reverse Telnet Mode
In Reverse Telnet mode, the device port is
connected to a server and waits for a terminal
session to from a host on the network. This is
an appropriate mode for console management,
with device ports connected to the
console/AUX or COM ports of routers,
switches, or UPS units. Unlike TCP Server
mode, Reverse Telnet mode assists with CR/LF
conversion.
NPort 5600-8-DT
TCP/IP
RS-232
tenleT
Unix
Router Server Server
Windows NT
Port 7
Port 8
Port 5
Port 6
Port 3
Port 4
Port 1
Port 2
Disabled Mode
A device port can be disabled by selecting the Disabled operation mode.