User`s manual

NPort 5600-8-DT User’s Manual General Settings
4-8
Email and SNMP trap
The Email and SNMP trap parameters are used to configure how e-mail and SNMP traps are sent
when an automatic warning is issued by the NPort device server.
Mail Server (default = blank): This optional field is for the IP address or domain name of your
network mail server, if applicable. The mail server is required for the NPort to send e-mail
warnings of administrative events.
User name (default = blank): This optional field is used if your mail server requires it.
Password (default = blank): This optional field is used if your mail server requires it.
From E-mail address (default = blank): This optional field sets the “From” e-mail address that
will show up in an automatic warning e-mail.
E-mail address 1 through 4 (default = blank): These optional fields set the destination e-mail
address for automatic e-mail warnings.
ATTENTION
Consult your network administrator or ISP if you are unsure how to set the mail server settings.
The NPort’s automatic warning function may not work properly if the settings are incorrect. The
NPort supports SMTP AUTH with LOGIN, PLAIN, CRAM-MD5 (RFC 2554).
SNMP trap server (default = blank): This optional field is for the IP address or domain name of
your SNMP trap server, if applicable. The SNMP trap server is required for the NPort to send
SNMP traps for certain administrative events.