User`s manual

NPort 5600-8-DT User’s Manual Basic Installation
3-5
ATTENTION
Grounding and wire routing helps limit the effects of noise due to electromagnetic interference
(EMI). Before attaching any serial devices, run your ground wire from your grounding surface to
the device server’s grounding contact at the rear panel. Secure the connection with the provided
screw.
Connect Power
Connect the 12 to 48 VDC power line to the NPort 5600-8-DT’s terminal block or power jack. The
“Ready” LED will initially glow red. When the system is ready, the “Ready” LED will turn green.