User`s manual

NPort 5600-8-DT User’s Manual Overview of Hardware
2-6
The NPort 5610-8-DT-J only supports RS-232 signals.
Console Port Pinouts
Connector Pin RS-232
1 DSR
2 RTS
3 GND
4 TxD
5 RxD
6 DCD
7 CTS
81
RJ45
8 DTR
Product Specifications
LAN
Ethernet 2 × 10/100 Mbps, RJ45
Protection Built-in 1.5 KV magnetic isolation
Serial Interface
Interface RS-232 (NPort 5610-8-DT, 5610-8-DT-J)
RS-232/422/485 (NPort 5650-8-DT, 5650-8-DT-J, 5650I-8-DT)
No. of Ports 8
Port Connector DB9 male (NPort 5610-8-DT, 5650-8-DT, 5650I-8-DT)
RJ45 8-pin (NPort 5610-8-DT-J, 5650-8-DT-J)
Signals RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485 (2-wire): Data+, Data-, GND
RS-485 (4-wire): Tx+, Tx-, Rx+, Rx-, GND
Serial Line Protection 15 KV ESD for all signals
Isolation 2K VDC isolation on device ports (NPort 5650I-8-DT only)
RS-485 Data Direction ADDC™ (Automatic Data Direction Control)
Serial Communication Parameters
Parity None, Even, Odd, Space, Mark
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Flow Control RTS/CTS, DSR/DTR (RS-232 only), XON/XOFF
Transmission Speed 50 bps to 921.6 Kbps
Power Line Protection
4 KV Burst (EFT), EN61000-4-4
2 KV Surge, EN61000-4-5