Network Card User Manual

NPort IA5150/5250 Series User’s Manual Web Console Configuration
5-6
Web console
Setting Factory Default Necessity
Enable or Disable Enable Required
Telnet console
Setting Factory Default Necessity
Enable or Disable Enable Required
ATTENTION
If you disable both the “Web console” and “Telnet console,” you can still use NPort
Administrator to configure NPort IA5150/5250 either locally or remotely over the network.
Refer to Chapter 6 for more details.
Reset button protect
Setting Factory Default Necessity
No or Yes No Optional
Options are No and Yes, with default = No.
NOTE: Select the Yes option to allow limited use of the Reset Button. In this case, the Reset
Button can be used for only 60 seconds. I.e., 60 sec. after booting up, the Reset Button will be
disabled automatically.
Network Settings