User`s manual

UC-7112-LX Plus Linux User’s Manual Boot Loader Utility
A-7
B. Check if Your Embedded Computer Supports the Boot Loader Utility
1. Power on the embedded computer. If the following information appears on the HyperTerminal
screen, it means that you can use the boot loader utility to upgrade or recover the firmware.
PRESS <DEL> FOR SYSTEM RECOVERY
2. Some models support the boot loader utility, but the screen will not appear. In this case, hold
down the DEL key on your PC and then power on the embedded computer again. If the boot
loader utility menu appears, continue to the next chapter for firmware upgrade or recovery
instructions.
3. If you do not see the boot loader utility menu, your embedded computer does not support the
boot loader utility. Contact Moxa’s technical support staff for assistance.