User`s manual

A
A
Appendix A Boot Loader Utility for Firmware
Upgrade or Recovery
Moxa provides a boot loader utility for firmware upgrade or recovery. You will need the following
items to use this utility.
1. The embedded computer whose firmware you would like to upgrade or recover.
2. A PC or a laptop computer.
3. A console port cable for connecting through HyperTerminal.
4. A cross-over Ethernet cable for upgrading the firmware through a TFTP server and LAN port.
5. The firmware for the embedded computer.
The recovery includes four steps.
A. Configure HyperTerminal for the console port.
B. Check if your embedded computer supports the boot loader utility.
C. Download and install the TFTP program.
D. Download the firmware and upgrade through HyperTerminal.