User`s manual

UC-7112-LX Plus Software User’s Manual Managing Communications
4-24
Setup 2: Ethernet Bridging for Private Networks on the Same Subnet
1. Set up four machines as shown in the following diagram:
OpenVPN A
OpenVPN B
Host A
LAN1: 192.168.2.171
Host B
LAN1: 192.168.4.172
LAN1: 192.168.8.174
LAN1: 192.168.2.173
local net
local net
tenretnItenretnI
LAN2: 192.168.4.174
LAN2: 192.168.8.173
2. The configuration procedure is almost the same as for the previous example. The only
difference is that you will need to comment out the parameter “up” in
“/etc/openvpn/A-tap0-br.conf” and “/etc/openvpn/B-tap0-br.conf”.
Setup 3: Routed IP
1. Set up four machines as shown in the following diagram:
OpenVPN A
OpenVPN B
Host A
LAN1: 192.168.2.171
Host B
LAN1: 192.168.4.172
LAN1: 192.168.8.174
LAN1: 192.168.2.173
local net
local net
tenretnItenretnI
LAN2: 192.168.4.174
LAN2: 192.168.8.173
2. Create a configuration file named “A-tun.conf” and an executable script file named
“A-tun.sh”.
# point to the peer
remote 192.168.8.174
dev tun
secret /etc/openvpn/secrouter.key
cipher DES-EDE3-CBC
auth MD5
tun-mtu 1500
tun-mtu-extra 64
ping 40
ifconfig 192.168.2.173 192.168.4.174
up /etc/openvpn/A-tun.sh
#--------------------------------- Start-----------------------------