Specifications

fSTOP Wireless V2-1 BarTech Receiver Manual 30-Dec-13
PLC Electronic Solutions Ltd. Copyright © 2013
www.plcelectronicsolutions.com 8 of 20
b. Using the CHAN switch on the fSTOP Wireless V2-1 for FOCUS choose the same
channel (0, 3 or 7) by rotating center selector with a small tool until the arrow points
to the desired channel. The selector can be turned in either direction.
c. Using the CHAN switch on the fSTOP Wireless V2-1 for IRIS or ZOOM choose the
corresponding channel in accordance with the above table of channel options by
rotating center selector with a small tool until the arrow points to the desired channel.
Note: To AVOID INTERFERENCE when using two BFD Handsets simultaneously:
USE the below channel combinations with a ✔ .
BFD #1 Channel
BFD #2 Channel
0
1
2
3
4
5
6
7
0
X X
✔ ✔ ✔
X
✔ ✔
1
X X X
✔ ✔ ✔ ✔ ✔
2 ✔
X X X
✔ ✔
X
✔
3 ✔ ✔
X X X
✔ ✔
X
4 ✔ ✔ ✔
X X X
✔ ✔
5
X
✔ ✔ ✔
X X X
✔
6 ✔ ✔
X
✔ ✔
X X X
7 ✔ ✔ ✔
X
✔ ✔
X X
3.4. Setting Motor DIRECTION
The DIRECTION Switch on the fSTOP Wireless V2-1 sets the direction of travel of the
motor. Toggling the direction switch will recalculate the position and slowly move the
motor to the new position.