Specifications

fSTOP Wireless V2-1 BarTech Receiver Manual 30-Dec-13

www.plcelectronicsolutions.com 7 of 20

3.3. Dual fSTOP Wireless V2-1 Operation (FOCUS + IRIS) or (FOCUS +

ZOOM)

NOTE: A BFD Handset with the SLIDER OPTION is REQUIRED. A SECOND fSTOP

Wireless V2-1 is REQUIRED.

If your BFD Handset is equipped with the slider option you can either control the IRIS or

the ZOOM in addition to the FOCUS. The setup is the same for Focus + Iris or for Focus +

Zoom. The only difference is the function you assign to the motor attached to the second

fSTOP Wireless V2-1.

All fSTOP Wireless V2-1’s are identical. When we refer as V2-1 for a particular function

(Focus-Iris-Zoom) it refers to the function of the motor you assign to that particular receiver.

Three channels are available for DUAL fSTOP Wireless V2-1 Operation.

You have the following channel set-up options:

BFD

Handset

Transmitter

V2-1

Receiver

for Focus

V2-1

Receiver

for Zoom or

Iris

option 1

channel 0

channel A

option 2

channel 3

channel B

option 3

channel 7

channel C

a. On the BFD Handset choose channel 0, channel 3 or channel 7 by rotating the

selector until the arrow points to the desired channel. The selector can be turned in

either direction. Channels 1,2,4,5 and 6 are not used in dual receiver operation.