Specifications

fSTOP Wireless V2-1 BarTech Receiver Manual 30-Dec-13

www.plcelectronicsolutions.com 19 of 20

6.6. Iris Slider Maintenance

My Iris Slider is sticky or has dirt in the slider guide.

 To clean the BarTech Iris Slider guide unscrew the 2 Phillips screws on the end of

the slider in the plastic stopper. Slide out the stopper and slider knob. Clean the

guide and knob with alcohol and replace the slider knob with the rounded end going

in first. Slide in the stopper and screw it back into place. The slider works on a

magnetic system. No wires are attached when you remove the slider.

Note: Be careful not to over tighten the screws.