Specifications

fSTOP Wireless V2-1 BarTech Receiver Manual 30-Dec-13

www.plcelectronicsolutions.com 12 of 20

3.8. Setting LIMITS

The LIMITS button is used to limit the travel of the motor between 2 user defined positions.

When the limits are set the position of the focus knob on the BFD Handset is recalculated

to the corresponding position between the 2 limits set by the user, i.e. fully clockwise will

move the motor to one limit and fully counterclockwise will move to the other limit.

a. When the LIMITS light is off no limits are set. With the BFD Handset

communicating with the fSTOP Wireless V2-1 and the motor calibrated, position the

motor at the first limit you would like to set using the BFD Handset knob.

b. Press in the LIMITS button until the LIMITS light starts blinking orange then release.

This indicates that the fSTOP Wireless V2-1 has set the first limit and is waiting for

the second limit to be set.

c. Move the BFD Handset knob until the motor is at the second desired limit.

d. Press in the LIMITS button until the LIMITS light is solid orange then release to save

the limits into memory.

Note: There is a minimum Limit setting.

Clearing Limits

Once the limits are set, indicated by a solid orange light, press the LIMITS button down

until the light turns off.

Note: The limits are stored in the fSTOP Wireless V2-1 memory and will remain in

memory for up to 45 minutes after power is removed.