User`s manual
Table Of Contents
- 1. Introduction
- 2. Getting Started
- Before Getting Started
- Setting up an Ethernet Environment
- Cable Connection
- Powering on VPort 2140 Video Server
- Assigning an IP Address to VPort 2140 Video Server
- Working in a DHCP Server Networking Environment
- Installing the VPort Installation Wizard
- Running the VPort Installation Wizard
- Working in a Non-DHCP Server Networking Environment
- Assigning the IP Address Manually
- Accessing VPort 2140 Video Server for the First Time
- Setting up a Modem Environment
- Mounting VPort 2140
- 3. Accessing VPort 2140 Video Server for the First Time
- 4. System Configuration
- 5. Advanced Applications
- 6. Upgrading System Firmware
- 7. Troubleshooting
- A. URL Commands of Video Server
- Page URL
- System Resource URL
- General Format of Command URL
- System Configuration URL
- Security Configuration URL
- Network Configuration URL
- Video Configuration URL
- Image Quality Configuration URL
- COM 1 Configuration URL
- COM 2 configuration URL
- Camera custom command configuration URL
- Camera preset configuration URL
- Custom camera configuration URL
- Application configuration URL
- Motion detection configuration URL
- Demo configuration URL
- Homepage layout configuration URL
- B. Settings of Supported PTZ Cameras
- C. Camera Control Cable
- D. Time Zone Table
- E. Technical Specifications
- F. Service Information
E
E
Appendix E Technical Specifications
System
CPU: Trimedia PNX1300
RAM: 16MB SDRAM
ROM: 2MB FLASH ROM
Networking
Adjustable bandwidth limit
Protocols
TCP/IP, HTTP, SMTP, FTP, Telnet, NTP, DNS
and DHCP
Modem
PPP (dial-up, direct cable connection)
Ethernet
10BaseT Ethernet or 100BaseT Fast Ethernet
Video
Algorithms Supported
JPEG, MJPEG
Video Inputs and Outputs
4 BNC video inputs with 75 ohm terminal
switch, NTSC/PAL auto-sensing
4 BNC loop-through video outputs
Features
Adjustable image size and quality
B/W or color control
Timestamp and text overlay
Resolution
NTSC
Up to 30 frames at 176x112
Up to 30 frames at 352x240
Up to 9 frames at 704x480 or quad
PAL
Up to 25 frames at 176x144
Up to 25 frames at 352x288
Up to 8 frames at 704x576 or quad
LED Indicators
NETWORK:
ACTIVE, LINK, FDX (full duplex)
SYSTEM:
POWER, CONNECT, SERIAL
Dimensions
193.71 x 195 x 44.3 mm (W x D x H)
Weight
Net. 890g
Power
Consumption: near 7.8W
Input: 100-240VAC, 50/60Hz, 0.4A
Output: 12VDC, 1.5A (12 VDC, 1.25A for UK
plug)
External Power Supply
Operating Environment
Operating Temperature: 0 to 65°C/ 32 to 149°F
Storage Temperature: -40 to 70°C/ -14 to 158°F
Humidity: 95%RH
Alarm Features
Motion detection with percentage and
sensitivity
Daily repeat timing schedule
3 color images per camera for pre/post alarm
Automatic transfer of stored images via email or
FTP with event-triggered actions
PAN/TILT/ZOOM
Multiple PTZ camera control through RS-232 or
RS-485
Supported devices and protocols:
Sony VISCA protocol, Canon VC-C1, VC-C3,
VC-C4, Dynacolor SmartDOME, Pelco
D-protocol, Lilin Speeddome, Ernitec
Speeddome
CGI command serial driver is supported