User`s manual
Table Of Contents
- 1. Introduction
- 2. Getting Started
- Before Getting Started
- Setting up an Ethernet Environment
- Cable Connection
- Powering on VPort 2140 Video Server
- Assigning an IP Address to VPort 2140 Video Server
- Working in a DHCP Server Networking Environment
- Installing the VPort Installation Wizard
- Running the VPort Installation Wizard
- Working in a Non-DHCP Server Networking Environment
- Assigning the IP Address Manually
- Accessing VPort 2140 Video Server for the First Time
- Setting up a Modem Environment
- Mounting VPort 2140
- 3. Accessing VPort 2140 Video Server for the First Time
- 4. System Configuration
- 5. Advanced Applications
- 6. Upgrading System Firmware
- 7. Troubleshooting
- A. URL Commands of Video Server
- Page URL
- System Resource URL
- General Format of Command URL
- System Configuration URL
- Security Configuration URL
- Network Configuration URL
- Video Configuration URL
- Image Quality Configuration URL
- COM 1 Configuration URL
- COM 2 configuration URL
- Camera custom command configuration URL
- Camera preset configuration URL
- Custom camera configuration URL
- Application configuration URL
- Motion detection configuration URL
- Demo configuration URL
- Homepage layout configuration URL
- B. Settings of Supported PTZ Cameras
- C. Camera Control Cable
- D. Time Zone Table
- E. Technical Specifications
- F. Service Information
VPort 2140 User’s Manual URL Commands of Video Server
A-8
up1 <text string shorter than 80
characters>
tilt up command string of COM1
down1 <text string shorter than 80
characters>
tilt down command string of COM1
left1 <text string shorter than 80
characters>
pan left command string of COM1
right1 <text string shorter than 80
characters>
pan right command string of COM1
home1 <text string shorter than 80
characters>
home command string of COM1
tele1 <text string shorter than 80
characters>
zoom in command string of COM1
wide1 <text string shorter than 80
characters>
zoom out command string of COM1
baud2 <integer> set baud rate of COM2
data2 <integer> set data bits of COM2
1 set 1 stop bit of COM2 stop2
2 <other than 1> set 2 stop bits of COM2
None set parity check of COM2 to none
Odd set parity check of COM2 to odd
parity2
Even set parity check of COM2 to even
up2 <text string shorter than 80
characters>
tilt up command string of COM2
down2 <text string shorter than 80
characters>
tilt down command string of COM2
left2 <text string shorter than 80
characters>
pan left command string of COM2
right2 <text string shorter than 80
characters>
pan right command string of COM2
home2 <text string shorter than 80
characters>
home command string of COM2
tele2 <text string shorter than 80
characters>
zoom in command string of COM2
wide2 <text string shorter than 80
characters>
zoom out command string of COM2
Application configuration URL
URL: /cgi-bin/app.cgi
Name Value Description
sun <not required> set Sunday in weekly schedule
mon <not required> set Monday in weekly schedule
tue <not required> set Tueday in weekly schedule
wed <not required> set Wednesday in weekly schedule
thu <not required> set Thursday in weekly schedule
fri <not required> set Friday in weekly schedule
sat <not required> set Saturday in weekly schedule
sbegin <hh:mm:ss> time to start in weekly schedule
send <hh:mm:ss> time to stop in weekly schedule
inv <not required> set inverse mode in weekly schedule
enfile <not required> enable script file
emode <not required> event operation