User`s manual
Table Of Contents
- 1. Introduction
- 2. Getting Started
- Before Getting Started
- Setting up an Ethernet Environment
- Cable Connection
- Powering on VPort 2140 Video Server
- Assigning an IP Address to VPort 2140 Video Server
- Working in a DHCP Server Networking Environment
- Installing the VPort Installation Wizard
- Running the VPort Installation Wizard
- Working in a Non-DHCP Server Networking Environment
- Assigning the IP Address Manually
- Accessing VPort 2140 Video Server for the First Time
- Setting up a Modem Environment
- Mounting VPort 2140
- 3. Accessing VPort 2140 Video Server for the First Time
- 4. System Configuration
- 5. Advanced Applications
- 6. Upgrading System Firmware
- 7. Troubleshooting
- A. URL Commands of Video Server
- Page URL
- System Resource URL
- General Format of Command URL
- System Configuration URL
- Security Configuration URL
- Network Configuration URL
- Video Configuration URL
- Image Quality Configuration URL
- COM 1 Configuration URL
- COM 2 configuration URL
- Camera custom command configuration URL
- Camera preset configuration URL
- Custom camera configuration URL
- Application configuration URL
- Motion detection configuration URL
- Demo configuration URL
- Homepage layout configuration URL
- B. Settings of Supported PTZ Cameras
- C. Camera Control Cable
- D. Time Zone Table
- E. Technical Specifications
- F. Service Information
VPort 2140 User’s Manual URL Commands of Video Server
A-6
COM 2 configuration URL
URL: /cgi-bin/serial2.cgi
Name Value Description
generic accept generic CGI commands
modem use modem
detect
none no drivers
Sony VISCA
Canon VCC1
Canon VCC3
Canon VCC4
DynaDome/SmartDOME
Pelco D protocol
Lilin PIH-7x00
Ernitec
driver
Custom Camera third party PTZ camera
Tone (ATDT) make modem dial in tone method
Pulse (ATDP) make modem dial in pulse
reatt <integer> redial attempts
discon <integer> minutes delay before disconnection
init <text string shorter than 40
characters>
command to initialize modem
phone1 <text string shorter than 40
characters>
phone number of primary ISP
user1 <text string shorter than 40
characters>
user name for primary ISP
pass1 <text string shorter than 40
characters>
password for primary ISP
phone2 <text string shorter than 40
characters>
phone number of secondary ISP
user2 <text string shorter than 40
characters>
user name for secondary ISP
pass2 <text string shorter than 40
characters>
password for secondary ISP
Camera custom command configuration URL
URL: /cgi-bin/cuscom.cgi
Name Value Description
str11 <text string shorter than 8
characters>
button name of custom command 1 of COM1
str12 <text string shorter than 8
characters>
button name of custom command 2 of COM1
str13 <text string shorter than 8
characters>
button name of custom command 3 of COM1
str14 <text string shorter than 8
characters>
button name of custom command 4 of COM1
str15 <text string shorter than 8
characters>
button name of custom command 5 of COM1
com11 <text string shorter than 80
characters>
custom command 1 of COM1
com12 <text string shorter than 80
characters>
custom command 2 of COM1