User`s manual
Table Of Contents
- 1. Introduction
- 2. Getting Started
- Before Getting Started
- Setting up an Ethernet Environment
- Cable Connection
- Powering on VPort 2140 Video Server
- Assigning an IP Address to VPort 2140 Video Server
- Working in a DHCP Server Networking Environment
- Installing the VPort Installation Wizard
- Running the VPort Installation Wizard
- Working in a Non-DHCP Server Networking Environment
- Assigning the IP Address Manually
- Accessing VPort 2140 Video Server for the First Time
- Setting up a Modem Environment
- Mounting VPort 2140
- 3. Accessing VPort 2140 Video Server for the First Time
- 4. System Configuration
- 5. Advanced Applications
- 6. Upgrading System Firmware
- 7. Troubleshooting
- A. URL Commands of Video Server
- Page URL
- System Resource URL
- General Format of Command URL
- System Configuration URL
- Security Configuration URL
- Network Configuration URL
- Video Configuration URL
- Image Quality Configuration URL
- COM 1 Configuration URL
- COM 2 configuration URL
- Camera custom command configuration URL
- Camera preset configuration URL
- Custom camera configuration URL
- Application configuration URL
- Motion detection configuration URL
- Demo configuration URL
- Homepage layout configuration URL
- B. Settings of Supported PTZ Cameras
- C. Camera Control Cable
- D. Time Zone Table
- E. Technical Specifications
- F. Service Information
VPort 2140 User’s Manual System Configuration
4-27
[ALERT]
<script file enabled>
NO or YES to activate external script
<motion detection channel enabled>
(0)NO or YES
(1)NO or YES
(2)NO or YES
(3)NO or YES
<snapshot channel enabled>
(0)NO or YES
(1)NO or YES
(2)NO or YES
(3)NO or YES
<series snapshot channel enabled>
(0)NO or YES
(1)NO or YES
(2)NO or YES
(3)NO or YES
<application mode>
0 disabled, 1 for Sequential, 10 for motion
detection event, 12 for DI event
<visual alert>
NO or YES
<upload method>
0 FTP, 1 for email
<file with time suffix>
YES or NO
<percentage of object size over screen>
(0)10 1 to 99
(1)10 1 to 99
(2)10 1 to 99
(3)10 1 to 99
<percentage of sensitivity>
(0)90 1 to 99
(1)90 1 to 99
(2)90 1 to 99
(3)90 1 to 99
<seconds to snapshot periodically>
0
<time to start snapshot>
00:00:00 24 hours format
<time to stop snapshot>
00:00:00 24 hours format
[DEMO]
<demo enabled>
NO or YES
<PTZ enabled>
(0)NO or YES
(1)NO or YES
(2)NO or YES
(3)NO or YES