User`s manual

VPort 2140 User’s Manual System Configuration
4-25
<brightness>
(0)0 between 5 and –5
(1)0 between 5 and –5
(2)0 between 5 and –5
(3)0 between 5 and –5
<contrast>
(0)0 between 5 and –5
(1)0 between 5 and –5
(2)0 between 5 and –5
(3)0 between 5 and –5
<hue>
(0)0 between 5 and –5
(1)0 between 5 and –5
(2)0 between 5 and –5
(3)0 between 5 and –5
<saturation>
(0)0 between 5 and –5
(1)0 between 5 and –5
(2)0 between 5 and –5
(3)0 between 5 and –5
[SERIAL 1]
<data bits>
0
<stop bits>
0
<parity bits>
0 None, 1 for Odd, 2 for Even
<baud rate>
0
<ccd model>
0 None, 1 for Generic, 2 for Sony VISCA,
3 for Canon VC-C1, 4 for Canon VC-C3,
5 for Canon VC-C4, 6 for DynaDome,
7 for Pelco D, 8 for LiLin, 9 for Ernitec,
10 for Custom Camera
<uart mode>
RS232 or RS485
<speedlink commands>
(0) string of maximum 60 characters
(1) string of maximum 60 characters
(2) string of maximum 60 characters
(3) string of maximum 60 characters
(4) string of maximum 60characters
<custom ccd commands>
HOME
string with maximum of 60 characters
UP
string with maximum of 60 characters
DOWN
string with maximum of 60 characters
LEFT