User`s manual
Table Of Contents
- 1. Introduction
- 2. Getting Started
- Before Getting Started
- Setting up an Ethernet Environment
- Cable Connection
- Powering on VPort 2140 Video Server
- Assigning an IP Address to VPort 2140 Video Server
- Working in a DHCP Server Networking Environment
- Installing the VPort Installation Wizard
- Running the VPort Installation Wizard
- Working in a Non-DHCP Server Networking Environment
- Assigning the IP Address Manually
- Accessing VPort 2140 Video Server for the First Time
- Setting up a Modem Environment
- Mounting VPort 2140
- 3. Accessing VPort 2140 Video Server for the First Time
- 4. System Configuration
- 5. Advanced Applications
- 6. Upgrading System Firmware
- 7. Troubleshooting
- A. URL Commands of Video Server
- Page URL
- System Resource URL
- General Format of Command URL
- System Configuration URL
- Security Configuration URL
- Network Configuration URL
- Video Configuration URL
- Image Quality Configuration URL
- COM 1 Configuration URL
- COM 2 configuration URL
- Camera custom command configuration URL
- Camera preset configuration URL
- Custom camera configuration URL
- Application configuration URL
- Motion detection configuration URL
- Demo configuration URL
- Homepage layout configuration URL
- B. Settings of Supported PTZ Cameras
- C. Camera Control Cable
- D. Time Zone Table
- E. Technical Specifications
- F. Service Information
VPort 2140 User’s Manual System Configuration
4-18
Logo figure
1. Select the blank option to hide the logo figure, which appears in the upper-left corner of the
homepage.
2. The “default” logo is the MOXA logo.
3. An external logo or image can be used by selecting the URL option, and typing the url for the
image in the text input box.
Logo link
Administrators set up the Logo with a Logo link, so that visitors are directed to another web
address when they click on the logo.
Background graph
As with Logo graph, Background graph gives administrators the ability to customize the
background as blank, default, or an external image by selecting the URL option, and typing the
url for the image in the text input box.
Font and Background color
The Font color and Background color can be chosen from sixteen custom colors.
ATTENTION
The Background color option is active only when Background graph is set as blank.
Web page display mode
There are two homepage display modes. One is Image mode, which uses icons to link to the
various functions; the other is Text mode, which uses mostly text to link to the various functions.
Administrator can change the string content manually.
ATTENTION
See the Customize graphics in homepage section from Chapter 5 to see how to replace the
default images for the Video Server’s log, background, and buttons.