User`s manual
Table Of Contents
- 1. Introduction
- 2. Getting Started
- Before Getting Started
- Setting up an Ethernet Environment
- Cable Connection
- Powering on VPort 2140 Video Server
- Assigning an IP Address to VPort 2140 Video Server
- Working in a DHCP Server Networking Environment
- Installing the VPort Installation Wizard
- Running the VPort Installation Wizard
- Working in a Non-DHCP Server Networking Environment
- Assigning the IP Address Manually
- Accessing VPort 2140 Video Server for the First Time
- Setting up a Modem Environment
- Mounting VPort 2140
- 3. Accessing VPort 2140 Video Server for the First Time
- 4. System Configuration
- 5. Advanced Applications
- 6. Upgrading System Firmware
- 7. Troubleshooting
- A. URL Commands of Video Server
- Page URL
- System Resource URL
- General Format of Command URL
- System Configuration URL
- Security Configuration URL
- Network Configuration URL
- Video Configuration URL
- Image Quality Configuration URL
- COM 1 Configuration URL
- COM 2 configuration URL
- Camera custom command configuration URL
- Camera preset configuration URL
- Custom camera configuration URL
- Application configuration URL
- Motion detection configuration URL
- Demo configuration URL
- Homepage layout configuration URL
- B. Settings of Supported PTZ Cameras
- C. Camera Control Cable
- D. Time Zone Table
- E. Technical Specifications
- F. Service Information

VPort 2140 User’s Manual System Configuration
4-13
Application
VPort 2140 Video Server provides 4 major applications.
1. Weekly schedule: Administrators can set up the Application schedule by week.
2. External script files: For advanced applications, administrators can program command
scripts, which can be uploaded to the VPort 2140 Video Server.
3. Event operation: Administrators can set trigger conditions by selecting Motion Detected, or
DI Condition, etc., options, and trigger actions by selecting Trigger output alarm while
input condition matched, etc., options.
4. Sequential mode: Administrators can set the sequential snapshot mode to send the snapshot
by time interval.
To set up the 4 applications that VPort 2140 Video Server provides, administrators must have a
certain level of knowledge about the setting items listed in the Application web page. Below is the
table that separates the setting items into 4 levels. Higher-level settings will not be activated unless
lower-level items are checked.